Tips hanabi

This guide is for strategy tips: How to interpret clues, how to give clues, how to decide to play, discard or clue. Click here for the introduction to the game.

General

On BGA, there is no 1-strategy-to-be-played. However, if people start playing different strategies in 1 game, the game is doomed to fail. That is why communication in advance is very important, and why most hanabi-players get a lot of red thumbs. (Different strategy is interpreted as ruining the game.)

Basics

The basic game, plays with 50 cards: 10 for each colour. If you want to get the maximum score of 25 points, you need to play 25 cards. Some of the cards are left in the players hands at the end of the game. Depending on the number of players, this will be 8, 12, 12, or 15 (for 2p, 3p, 4p, and 5p respectively). This means in the entire game, there are 17, 13, or 10 cards that can be discarded for clues. You also get 8 clue tokens at the start, making the total number of clues in the entire game 25, 21, or 18. This gives the logical conclusion that you can not clue the colour AND number for every card in your hand, because there are simply not enough clues.

It is therefore paramount, that only useful cards are clued. If you mark a card that you know will not be played, it will cost another clue (-1) to make your team mate discard that card to gain a clue (+1), which is a net result of 0. If the card is not marked, your team mate will discard it eventually to gain a clue (+1), which is a net result of +1.

This leads to Basic Rule #1 (cluing).

Every card that is marked, is either

   a) (a) useful card(s) to be saved (interpret it as PLAY LATER), or
   b) a useful card to be played (interpret it as PLAY NOW).
   Therefore: NEVER mark useless cards

Most hanabi-players on BGA play by this main rule. So when a clue is given, ask yourself "Is this clue to save something"? If not, it is to get played. Saving cards is important because there are only 2 cards of value 2, 3, and 4 in each suit, and only 1 card of value 5. To not get stuck on that colour it is urgent to keep the last copy of a card safe (prevent from discarding it).

The game interface puts every new card you draw, on the left-hand side of your hand. This means, the left-most card is the newest card, which makes your right-most card automatically the oldest. If a card has been in your hand for a long time, and you have not been given a clue that marks it, it is logical that it is a useless card and safe to discard.

Hence, Basic Rule #2 (discarding).

   Discard first what you know is useless (like a clued 1 when all 1s are already played). After that: discard your oldest (right-most) unclued card.

Note, that this rule is already a bit tricky. At the start of the game, every card can be considered equally old. This is where personal preference of players starts to matter.

Another result from the newest --> oldest order, is the interpretation of multiple marked cards. When you get a clue that marks multiple cards, and you can identify it is in fact a clue for play (see Basic Rule 1), you should play the newest (left-most) card. If an older card was "the playable card", it would probably be clued earlier. The logical conclusion must be, that the newest card, was the card you all have been waiting for, and you happened to draw it.

Basic Rule #3 (playing).

   Play the newer (left-most) clued card

So most people on BGA expect you to ONLY play the clued card on the left. The rest of the cards are just to be kept on your hand. Beware that there are different approaches and not all players play by this convention.

Basic Example

Imagine the following starting situation:

           (oldest ... newest)
 Player 1:  W1, Y1, B2, Y2, B2
 Player 2:  G1, G1, W3, Y2, B1
 Player 3:  B1, R4, W4, R3, G3

P1 can clue 1s to P2. But that will mark both G1's, so it's not the best option. Better is for P1 to clue P3 1s, or blue. (If BLUE-clue is given, then P3 will not worry about the B1 in P2's hand that is about to be discarded. Both 1-clue or BLUE-clue only mark 1 card, so give equal information about the other cards in P3's hand.)

P2 will clue 1s to P1. He knows that P3 prefers to play his 1. And P2 is the only person who can see that the 1s in both P1's hand, and P3's hand are different.

Everyone will have to wait for B2 to be discarded, before the second B2 can be clued. Everyone will also have to wait for G1 to be discarded, before the second G1 can be clued. Alternatively, when R1 is drawn and clued, then both G1's may be clued, since all 1's will be played and all cards marked 1 can be safely discarded.

So, the first four moves are:

1. P1 clues BLUE to P3 (7 clues).

2. P2 clues 1 to P1 (6 clues).

3. P3 plays B1 and draws R1.

4. P1 plays W1 and draws G4.

The game now looks like this, with P2 to move:

           (newest ... oldest)
 Player 1:  G4, Y(1), B2, Y2, B2                   Played: R0, Y0, G0, B1, W1
 Player 2:  G1, G1, W3, Y2, B1
 Player 3:  R1, R4, W4, R3, G3                     Discarded: -

5. P2 clues RED to P3.

There are two possible continuations from here. Option 1

6. P3 plays R1 and draws Y5.

7. P1 plays Y1 and draws Y3.

8. P2 discards B1 and draws G2 (7 clues).

9. P3 clues 1 to P2 (6 clues).

10. P1 discards B2 and draws R4 (7 clues).

11. P2 plays G1 and draws B5.

12. P3 clues 2 to P2 (6 clues).

And the game will look like this, with P1 to move:

           (newest ... oldest)
 Player 1:  R4, Y3, G4, B(2), Y(2)                Played: R1, Y1, G1, B1, W1
 Player 2:  G2, G(1), G(1), W3, Y2
 Player 3:  Y5, (R)4, W4, (R)3, G3                Discarded: B1, B2

Option 2

6. P3 clues 1 to P2 (5 clues). This move delays him playing the R1, but will make P2 more confident in discarding since he knows all the useless 1s.

7. P1 plays Y1 and draws Y5.

8. P2 plays G1 and draws Y3.

9. P3 plays R1 and draws G2.

10. P1 discards B2 and draws R4 (6 clues).

11. P2 discards B1 and draws B5 (7 clues).

12. P3 clues 2 to P2 (6 clues).

And the game will look like this, with P1 to move:

           (newest ... oldest)
 Player 1:  R4, Y5, G4, B(2), Y(2)                Played: R1, Y1, G1, B1, W1
 Player 2:  Y3, G(1), W3, Y2, B(1)
 Player 3:  G2, (R)4, W4, (R)3, G3                Discarded: B2, B1

Both options are equally valid. They end up in the same situation, with only the cards in hands being in a different order. Since the cards are picked at random, there is no valid reason to say one option is better than the other.

In both options, the 2-clue is given to P1, to mark both 2s as playable. Since all 1s are played, all 2s will be playable. Note that, in this game, two 1s where marked with one clue (and played); and two 2s were marked with one clue (and will be played). As stated in the beginning, there are a total of 21 clues (in this variant) to mark 25 cards. At this point in the game, there are 16 clues left to mark 18 cards. With only two more "efficient" clues, the game can end with a perfect score.

Advanced Moves

Intentional Discard

Sometimes players can have hands where all cards are important and unplayable. To tell a player that his hand blocked, discard your CHOP card, even when you know you have a playable card. This is often done when you are low on (or out of) clue-tokens. This is a risky move, since your team mate(s) might expect you to play, instead of discard. (always try to give him clue to give and play his hand as fast as it possible)

Positional Discard

Sometimes at the end of the game you will have no useful cards to play. You want to give a clue, but you have no remaining clue-tokens. In this case, you can discard the card in the same position as the card that you want that player to play.

Example Positional Discard

All players have agreed on the convention that a colour-clue means PLAY the left-most marked card.

           (newest ... oldest)
 Player 1:  XX, XX, XX, XX, XX                   Played: R5, Y5, G4, B5, W5
 Player 2:  ??, ??, ??, ??, ?3
 Player 3:  G5, B2, R4, B3, W1                   Discarded: -

In this example, when there are no clue-tokens left, Player 2 can discard his DRAW, to indicate to Player 3 the position of the last remaining playable card.

Hint to Discard

You can hint to a player to discard specific cards in order to save multiple cards, to to save cards without causing a confusion about finesse/reverse.

Example Hint to Discard In this example, all 1s have been played already. Both the Y3 and the G4 need to be saved.

 Player 1: G1, R1, B4, Y3, G4

If Player 1 is given a 4-clue, the G4 will be saved, but the Y3 will be the new CHOP card. One option to save both Y3, and G4 is to give Player 1, a 1-clue. This would make the R1 the new CHOP card, and the G1 will be the next CHOP card.

Double Save

This is an alternative solution if you are low on clue-tokens, or don't have enough players to execute multiple saves in a row.

Example Double Save In this example, W1 has not been played yet. Both the Y3 and the G4 need to be saved.

 Player 1: G1, R1, B4, Y3, G4

This situation is similar as the Hint to Discard. However, in this situation a 1-clue will be interpreted as PLAY G1 (which isn't playable). To save both Y3 and G4, a blue-clue can be given to Player 1. This will cause him to BOMB on B4 (which isn't playable). But this tells him that all the cards RIGHT of the B4 needed to be saved. Note that this is a desperate measure, because it costs 2 clue-tokens (1 for the blue-clue and 1 for the BOMB card that should have been discarded) for 2 saves, but gives you no information about the saved cards.

---

2P GAMES
With 2 players, you are limited in your options. Therefore the gameplay is different from 3+P games.

---

3+P GAMES

Prompt

A prompt can clarify (an) already marked card(s) to be played as well as mark the next card to play.

Example Prompt

All players have agreed on the convention that a colour-clue means PLAY the left-most marked card.

           (newest ... oldest)
 Player 1:  XX, XX, XX, XX, XX                   Played: R0, Y1, G0, B2, W0
 Player 2:  ??, ??, ??, ?2, ?5
 Player 3:  Y3, G5, R4, B3, W1                   Discarded: -

Player 1 give a yellow-clue to Player 3, marking Y3 as PLAY. Player 2 sees that the Y3 is ALMOST playable. This means that Player 2 has the LOGICAL in-between step: Player 2 has to play Y2. In this case, the Y2 is not on the DRAW card. The logical place for that card is the already marked 2. So Player 2 can assume that his card between the CHOP and the 5 is the Y2.

Finesse

This advanced move, can get you 2 cards into play, with only 1 clue-token. You do this, by marking an ALMOST playable card as playable. Someone else will have to play the LOGICAL in-between step, to make the card genuinely playable.

Example Finesse (#1)

All players have agreed on the convention that a colour-clue means PLAY the left-most marked card.

           (newest ... oldest)
 Player 1:  XX, XX, XX, XX, XX                   Played: R0, Y0, G0, B0, W0
 Player 2:  ??, ??, ??, ??, ?5
 Player 3:  G5, B2, R4, B3, W1                   Discarded: -

Player 1 gives a blue-clue to Player 3, marking B2 as PLAY, and B3 as SAVE. Player 2 sees that the B2 is ALMOST playable. This means that Player 2 has the LOGICAL inbetween step: Player 2 has to play B1. The only logical place for that card is at the LEFT-MOST POSITION so Player 2 can assume that the DRAW card is the playable B1. If it was somewhere else in your hand, the card would have been clued earlier. Note: for the in-between player, a prompt always has priority over a finesse; if a player has a marked card that can be the in-between card, they should play it.

Example Finesse (#2)

All players have agreed on the convention that a colour-clue means PLAY the left-most marked card.

           (newest ... oldest)
 Player 1:  ??, ??, ??, ??, ??                   Played: R0, Y1, G2, B0, W1
 Player 2:  Y2, R1, R1, G5, W5
 Player 3:  XX, XX, R2, XX, XX                   Discarded: G4, R3

Player 1 gives a 5-clue to Player 2, saving W5 and G5 from being discarded. Player 2 sees nothing of interest in the hand of Player 3, so discards his CHOP (R1) and draws R4. Player 3 gives a setup for Player 1 by marking Y2 with a yellow-clue. The game now looks like this:

           (newest ... oldest)
 Player 1:  ??, ??, ??, ??, ??                   Played: R0, Y1, G2, B0, W1
 Player 2:  R4,*Y2, R1, G5*,W5*
 Player 3:  XX, XX, R2, XX, XX                   Discarded: G4, R3, R1

Player 1 can't give a red-clue to Player 2, because this would cause Player 2 to bomb with r4. Instead, Player 1 now gives a red-clue to Player 3, marking R2 as PLAY. Player 2 sees that the R2 is ALMOST playable. This means that Player 2 has the LOGICAL inbetween step: Player 2 has to play R1. Player 2 knows that R2 can only be at the DRAW position, or at the middle position. Since Player 1 deliberately let Player 2 discard a playable 1 the round before, Player 2 concludes that she was already holding a second R1 at the time. Therefore, the LOGICAL place for the R1 to be, is at the middle position; NOT the DRAW position.

Bluff

This works the same as finesse. Only this time, the LOGICAL inbetween step, is a different playable card, so the player is tricked. It is slightly less strong that finesse, because it gives 1 play + 1 save for 1 clue-token.

Example Bluff

All players have agreed on the convention that a colour-clue means PLAY the left-most marked card.

           (newest ... oldest)
 Player 1:  XX, XX, XX, XX, XX                   Played: R0, Y0, G0, B0, W0
 Player 2:  W1, B2, R4, B3, G5
 Player 3:  ??, ??, ??, ??, R?                   Discarded: -

Player 1 gives a red-clue to Player 3, marking it as PLAY. Player 2 sees that the R2 is ALMOST playable, so applies finesse logic and plays his DRAW card. Much to Player 2's surprise, he has not played R1, but W1 (which was also playable). Because Player 3 saw Player 2 playing his DRAW, which was a different colour than the clue he received, Player 3 knows it was a bluffed finesse situation. He concludes that his red card is R2, and saves it for later.

Reverse

This works the same as finesse. Only this time, the LOGICAL inbetween step, is a different players hand. This also gets 2 plays for 1 clue-token, but takes longer than a normal finesse.

Example Reverse

All players have agreed on the convention that a colour-clue means PLAY the left-most marked card.

           (newest ... oldest)
 Player 1:  XX, XX, XX, XX, XX                   Played: R0, Y0, G0, B0, W0
 Player 2:  ??, ??, W?, ??, ??
 Player 3:  W1, B2, R4, B3, G5                   Discarded: -

Player 1 gives a white-clue to Player 2, marking it as PLAY. However, Player 2 sees that the DRAW card of Player 3 is a playable card of the same colour. Therefore, Player 2 assumes that it is (reversed) finesse, and that his white is ALMOST playable. Player 2 decides to discard his CHOP. Player 3 recognises the (reversed) finesse play, and plays his DRAW card to play the W1.

Having the optimal player draw the last card (endgame)

At the end of the game, the person who draws the last card (which happens either by playing or discarding) triggers the end of the game. After the last card is drawn, each player receives exactly one more turn. Sometimes near the end of the game you will want a specific player to play or discard in order to get the last turn. Giving an unusable clue can prevent a player from drawing the last card and begin the last round.

Table:
1 card remaining in deck - Your turn
R Y G B W M
5 5 3 4 5 5

XX|XX|5b - me

??|??|3? - you

1y|4b|5g - 3rd player

In this situation, assume everyone knows where the remaining playable cards are. Instead of discarding in this situation, you want the 3rd player be the one to play and draw the last card. Give any clue to prevent triggering the endgame so that 3rd player can play 4b triggering the endgame and then in their last turn play the 5g.